Laboratory mill LMT-2

Purpose and scope:
      The mill is designed for crushing laboratory samples of grain crops and their products in order to prepare for the subsequent determination of quality grain. LMT-2 is used in grain-pT, flour mills and grain processing plants, laboratories, GHI, the system of agriculture, breeding and research institutes, independent laboratories and other organizations involved in assessing the quality of agricultural crops and products of their processing. Used mill sample preparation to determine the number and quality of gluten, falling number, protein content, as well as other indicators, in determining which you want to grind the product for a given size. The mill provides sample grinding grain weight from 10g to 100g with a given stable particle size. Sieve control ground product is required (descent sieves N 067 is not more than 1%, N 38 screen pass at least 60%). The mill is equipped with interchangeable calibrated sieve diameter of 0,8 and 1,0 mm.

Description:
      Windmill LMT-2 consists of a body on which is mounted plate with a cyclone. On the cover plate is mounted, that contains a funnel reception, as well as the valve. The cavity contains the shell plate, made in the form of a ring with a notch on the inner side and a sieve. In the cavity plate, also, is the impeller. Inside the case skid mounted electric motor, resulting in a V-belt transmission to move the impeller. Source product is coming from the receiving hopper, lifting flow and through the slot with a hole in the lid falls into the cavity of the plate with a propeller. Under the action of the centrifugal force accompanying the impeller, the product is dropped on the cowling, acquiring a circular motion. While moving along the surface of shell with a notch product is crushed and the particles, together with air blown through a sieve in a cyclone. After separation from the product, the air through the cavity of the cover is displaced in the cavity plate, which passes through the filters for cleaning and thrown out. Shredded and separated from the air product is available in the reception capacity for the collection of the product.

Benefits of the mill laboratory LMT-2 over similar:
      The product is certified for compliance with safety requirements in UkrSEPRO.
      The presence of the controlled automatic dosing supplied product can grind the product of high humidity.
      The presence of self-cleaning device of dosing, grinding chamber and product eliminates the mixing of milled samples from the remnants of the previous sample.
      Drive belt - layered, reinforced by five layers of synthetic nylon yarns, almost pulled and does not require a regular stretcher.
      The special shape of the rotor eliminates wedging her by grinding larger grains (peas, corn, soybeans).
      The use of special filter fabric provides effective cleaning used air from dust and prevents its release into the working space laboratory.

Specifications:

Model

LMT - 2

The volume of the hopper, ml

280

The volume of output capacity, ml

250

Installed capacity, Wt

550

Power supply

220

Rotational speed of the working body, rpm

10200

Humidity milled product,%  

 20

The allowable number of grinding per hour

30

Time grinding sample weighing 50 g,s

20...40

The maximum size of refinable grains, mm

14

Diameter of sieve, mm

0,8;1,0

The smallest mass of milled product, g

10

Maximum mass of milled product, g

100

Noise level, dB

65...70

The system response time overload protection, s

5

Dimensions, mm:
Length
Width
Height (without hopper reception)

 
342
178
408

Weight, kg

17,5