Liter Purk PH-2

Purpose and scope:
      Liter Purk with falling load PH-2 is designed to determine the nature of grain (grain weight per liter). It is used in laboratories, processing enterprises, research organizations, etc.
Description:
      Purk consists of the following main components: a table, measurement, filler, filling the cylinder, falling weight, the knife. To work with Purk necessary electronic scales up to 3 kg of 4-th class. The table serves as a basis for assembling Purk to work. Merck is a cylindrical cup with a central bottom hole. At the top of the measurements there is a gap for a knife. The bar is set in the flange table. Filling is made in the form of a hollow cylinder with a groove on the ends. This allows you to set the filling tightly in his measure. Filling the cylinder is installed on the filler. Filling the cylinder has at one end cut window. Here inside the cylinder is mounted hopper with gate and lock. The falling weight is made in the form of a cylinder with a circular recess. The knife is made of stainless steel sheet is cut in a right angle. If the falling weight is on the bottom of the measurements, and push the knife into the crack measurements, the volume measurements between upper and lower plane cargo plane knife is strictly one liter.

Specifications: 

Model

PH-2

The error indications, g, not more

минус 4

Variation of the six dimensions, g, max

2,10

Dimensions, mm:

     in working order

240x240x720

      in transport condition

455x330x152

Weight, kg

15