eng
Production
- Mills
- Grain manufactories
- Universal grain manufactory OPTIMATIK-K-07
- Universal grain manufactory OPTIMATIK-K-15
- Complete universal groats-shop production capacity of 30 tons / day
- Complete universal grain manufactory capacity of 45 tons / day
- Complete grain manufactory processing oats production capacity of 30 tons / day
- Complete grain manufactory processing oats capacity of 60 tons / day
- Complete processing of buckwheat groats-shop production capacity of 30 tons / day
- Complete processing of buckwheat groats-shop capacity of 60 tons / day
- Cereal production line capacity of 12 tons / day
Equipment
- Cleaning and drying of grain
-
Production of flour and cereal
- Aspiration column AK-100 AK-200 AK-300
- Air - strainer separator SHS-3
- Machines for cleaning the surface of grain (hulling machine) IBO-3, MAO-3
- Debrander Design "Cascade" (machine for deep processing of grain surface)
- Grain heaters PZ
- Impetrate machine MBM-0, 5
- Entoleytor type” Simpaktor “EFM-0, 7, ESM-1, 5
- Flour sieving RMR-4
- Peel machine VDM-200, VDSO-400, VDSO-600
- Air separator (aspirator) ASO
- Steaming machine PCA-O
- Vertical dryer UPU-O
- Machine for splitting peas MRG-1, 5
- Choppers DKM-0.4, DCM-0.6, DCM-0.8
- Screw conveyors grinder
- Sifter BM-0, 8, BM-1, 2
- Sieving grinding CSC-4
- Tumble flakes SCE
- Hover machine A9-BPB
- Transport and aspiration
- Laboratory equipment
Machines for cleaning the surface of grain (hulling machine) IBO-3, MAO-3
Purpose and scope:
Machines are designed for cleaning the surface of grains of mineral impurities, partial removal of barbs, the embryo and torn envelopes. They are used in grain-cleaning units for the preparation of grain mills to grind.
Advantages:
High efficiency and reliability.
Small size and power consumption.
Ability to set the working bodies of different types and their rapid replacement
Description:
Hulling machine consists of a frame, drive and chassis which can be mounted rotor with whips, and sieve сlamping ring (IBO-3), rotor with abrasive discs and sieve сlamping ring (MAO-3). These working bodies are interchangeable, allowing dependent on the machines in the scheme of treatment for each batch of grain to pick up the most efficient сompletion.Grain enters the machine through the suction intake and processed as a result of interaction with the working bodies and due to friction between them. Refined grains derived from the machine through the exhaust pipe, and the waste is removed through the bottom of the funnel for dust.
Specifications:
| IBО-3 | МАО-3 |
| 3000 | 3000 |
| 0,02-0,03 | 0,03-0,05 |
| 100 | 100 |
| 3 | 5,5 |
Dimensions, mm Length/Width/Height |
|
|
| 275 | 315 |